Welcome to Shandong Yishun CNC Machinery Co.,Ltd official website!
Products
    Industry
Contact us
Shandong Yishun CNC Machinery Co.,Ltd.

Factory Add:The Kai Yuan road North First , Jinan City
Tel:86-0531-88286259 88276259
Fax:86-0531-88276259
Mobile: 0086-15553132939
Skype: yscnc01
Whatsapp: 0086-13355318526
Wechat: 0086-13355318526
E-mail:yishuncnc@163.com

Practicality Vacuum Adsorption Woodworking CNC Router

CNC Router of ordinary table and vacuum splint style. Vacuum adsorption woodworking CNC Router, practicality what?

1. Open the vacuum valve, do the next test. Will find a flat wooden adsorption effect is better. The curved, not flat sheet adsorption poor.

2. carved wooden products, relief and other products are not carved through adsorption to good effect. While the carved through poor hollow carved carving products adsorption wear.

3. The timing, manually fixed 2-4 minutes. The vacuum takes only 1-2 minutes. Time is superior to manually fixed.

Vacuum adsorption woodworking CNC Router, practical performance is quite good. Woodworking CNC Router engraving users according to their products to choose the most suited to their models.

Wood CNC Router on the market variety, splint fixed table CNC Router also has a vacuum suction-mounted wood CNC Router.

Vacuum wood CNC Router price is relatively expensive. Wood engraving made vacuum adsorption mechanism is applied by vacuum table vacuum formed. On the market, generally divided into six partitions vacuum empty, eight partitions vacuum empty. Vacuum table is made of wood about the thickness of a piece of 5 cm-point configuration, the material is very hard. In the above marked with six or eight holes to reach the suction strong adsorption function.

The following is a vacuum pump, the general power of 5.5KW, the greater the power, the stronger the adsorption capacity. Thus, when the carpenter sheet put on the table when the vacuum table can be directly carpentry plate directly adsorbed to live. Without manually fixing pallets.

But not all users are suitable for CNC Router with vacuum table.

First, only suitable for wooden doors, not hollow carved reliefs and other users.

Second, if it is hollow plaid, user openwork carving, it is recommended to use an ordinary card table plate fixed.

Third, the vacuum table is prone to inadequate intake air leaks and other defects. So you must choose a high quality woodworking CNC Router manufacturers
Contact
Factory Add:The Kai Yuan road North First , Jinan City
Tel:86-0531-88286259 88276259
Fax:86-0531-88276259
Mobile: 0086-15553132939
Skype: yscnc01
Whatsapp: 0086-13355318526
Wechat: 0086-13355318526
E-mail:
yishuncnc@163.com
Copyright © 2005-2015 Jinan Yishun CNC Machinery Co.,Ltd. All right reserved