Welcome to Shandong Yishun CNC Machinery Co.,Ltd official website!
Products
Contact us
Shandong Yishun CNC Machinery Co.,Ltd.

Factory Add:The Kai Yuan road North First , Jinan City
Tel:86-0531-88286259 88276259
Fax:86-0531-88276259
Mobile: 0086-15553132939
Skype: yscnc01
Whatsapp: 0086-13355318526
Wechat: 0086-13355318526
E-mail:yishuncnc@163.com
Location:Home-FAQFAQ

    What are the common faults stone carving mechanical and electrical machine

    1: stone carving mechanical and electrical machine speed is slow, there was a problem in this kind of situation mostly because of the motor power, we can use to check whether the cable is short circuit in a way that, also could be the result of a motor line phase.
    2: stone carving mechanical and electrical machine a reversal phenomenon. This is commonly caused by the motor line phase, can be directly to the output switch UVW.
    3: stone carving mechanical and electrical machine serious fever. Mainly stone carving machine cooling system appear problem, need to check the circulating water and the water pump is working correctly.
    4: stone carving mechanical and electrical machine noise, generally because the motor internal fault, need to find after sales to solve, also may be due to the motor load is too big, can adjust speed.


    Parsing of woodworking engraving machine cutting knife

    1, woodworking engraving machine processing procedures
    Processing program is carving processing instruction, it contains the instructions and speed, position is the basis of a machine tool movement, so the process is correct and reasonable will directly affect the tool cutting knife.
    2, the machine itself
    Engraving machine is a sculpture processing, also carved power provider, processing and carving machine whether to choose the right, the current state of the carving machine is normal will become the influence factors of cutting knife.
    3, cutting tool
    Engraving machine tool clamping state is also an influencing factor of the cutting knife, such as cutting tool clamping is not whole, radial runout is large, or the depths of the cutting tool length is too long, can cause cutting knife.
    4, material
    Carving material is processed object, the material itself if you have any impurities will cause uneven hardness, cutting knife.
    5, the clamping workpiece
    If the workpiece clamping false or clamping unstable cause cutting knife.
    6, cutting fluid,
    In the hard metal machining performance significantly.


    Woodworking engraving machine carved in the error is caused by what?

    1, loose control card or malfunction
    2, drive failure
    3, step motor fault
    4, electrostatic interference Line
    5, motor fault
    6, cable fault
    7, the wrong path
    8, fracture or loose coupling
    9, processing speed is too fast; (system parameter curve acceleration through big)
    10, computer system problem or virus


    Woodworking engraving machine dust prevention measures

    To fundamentally eliminate dust pollution, we should take comprehensive course, from the perspective of the production equipment, with advanced and reasonable mechanical equipment, supplemented by some dust, dust measures. But under the current conditions, the most effective measures or dust removal equipment. Dust removal equipment required to consider the choice of operation field of purification degree and the nature of the dust, etc. Wood dust for large and medium-sized wood dust can collect, for the most harmful of all kinds of fine wood dust, traditional effective way is to use pneumatic dust collecting device or cloth bag dust collection equipment to collect.


Contact
Factory Add:The Kai Yuan road North First , Jinan City
Tel:86-0531-88286259 88276259
Fax:86-0531-88276259
Mobile: 0086-15553132939
Skype: yscnc01
Whatsapp: 0086-13355318526
Wechat: 0086-13355318526
E-mail:
yishuncnc@163.com
Copyright © 2005-2015 Jinan Yishun CNC Machinery Co.,Ltd. All right reserved